At any time, you can change the study mode, and alternate between the practice mode and the exam mode. In practice mode, you can configure for example the number of questions or tests, and other parameters to help you study.
Randomized | 10 Questions Per Test | 20 Minutes | 70% to pass|
To re-configure your study mode again and change - for example - the number of tests, whether you have random questions and all other configuration parameters.
?Simulator Configuration
Auto-scroll: You can use the automatic scrolling of the questionnaire that occurs as soon as you answer one or all of the answers to a question correctly. Auto scrolling is activated if you answer a single answer, or as soon as you answer all the mandatory answers. Learning Mode: During learning mode you can get a real time result for your answer.
Free Test
Question: / 10
20:00Min. left
?Restart the current test
To restart the current test by clearing all your answers and the time used up to now. Warning: all answers will be lost.
Question: / 10
5.0(283 Votes)
Quiz
Question 1/101/10
Design annotation and detailing
Design annotation and detailing
Design annotation and detailing
Open the "Blend.dwg" file. Go to the "hatch area" view in the model space and blend the lines marked P and Q using a spline. Now add the ANSI31 hatch pattern in the closed area marked A. What is the area of hatch created?
Select the answer:Select the answer
1 correct answer
A.
9439.69
B.
8974.41
C.
8072.45
D.
9093.75
To answer this question, the user must open the "Blend.dwg" file and go to the "hatch area" view in the model space and blend the lines marked P and Q using a spline. Then, they must add the AN SI31 hatch pattern in the closed area marked A. The area of the hatch created is 9439.69. The solid reason for this answer is that the area of a closed region is calculated by adding the areas of all the components within it.
Right Answer: A
Quiz
Question 2/102/10
Application and drawing management
Application and drawing management
Application and drawing management
Open the "Array.dwg" file. Switch to the "Table" view in the model space. Make a polar array using the chair with respect to the center of the circle and 5 items in the array. Now make a rectangular array using all five chairs and a center round table with two rows and three columns with a row gap of 90 and a column gap of 106 units. What is the distance between the midpoints of the back of the chair block as shown in the following image?
Select the answer:Select the answer
1 correct answer
A.
627.60
B.
518.40
C.
309.20
D.
450.19
To answer this question, the user must open the "Array.dwg" file and switch to the "Table" view in the model space. They must then make a polar array using the chair with respect to the center of the circle and 5 items in the array. Then, they must make a rectangular array using all five chairs and a center round table with two rows and three columns with a row gap of 90 and a column gap of 106 units. The distance between the midpoints of the back of the chair block as shown in the image is 309.20.
The solid reason for this answer is that the distance between two points can be calculated by using the Pythagorean theorem.
Right Answer: C
Quiz
Question 3/103/10
Configure and manage design output
Configure and manage design output
Configure and manage design output
Open the "Scale.dwg" file. Scale the entire drawing in such a way that the length of the line marked BC becomes 302.44 units. What is the length of line AB now with respect to the new scale?
Select the answer:Select the answer
1 correct answer
A.
239.90
B.
1209.76
C.
907.32
D.
302.44
To answer this question, the user must open the "Scale.dwg" file and scale the entire drawing in such a way that the length of the line marked BC becomes 302.44 units. The length of line AB with respect to the new scale is 239.90. The reason for this is that when the drawing is scaled, all the lengths of the lines are changed proportionally. The solid reason for this answer is that the length of a line can be calculated by multiplying the original length with the scaling factor.
Right Answer: A
Quiz
Question 4/104/10
Author and edit drawing content
Author and edit drawing content
Author and edit drawing content
Open the "Hatch.dwg" file. Add the ANSI31 hatch pattern in the area marked P. Change the hatch scale to 2.8. How many hatch lines are visible in the hatched area?
Select the answer:Select the answer
1 correct answer
A.
9
B.
12
C.
6
D.
15
To answer this question, the user must open the "Hatch.dwg" file in AutoCAD and add the ANSI31 hatch pattern in the area marked P. They must then change the hatch scale to 2.8 using AutoCAD's HATCH command. The number of hatch lines visible in the hatched area can then be determined by counting the number of lines which will give a result of 6.
In other words, the user must open the "Hatch.dwg" file in AutoCAD, add the ANSI31 hatch pattern in the area marked P, and change the hatch scale to 2.8 using AutoCAD's HATCH command. Counting the number of lines will give a result of 6 which is the answer to this question.
Right Answer: C
Quiz
Question 5/105/10
Collaboration
Collaboration
Collaboration
Open "Table.dwg" file. Insert Table.xlsx file at point 0,0 in the Table.dwg file as a data link. Which of the following number is visible on the table?
Select the answer:Select the answer
1 correct answer
A.
4432
B.
5431
C.
876
D.
2014
The solution to this question requires the use of AutoCAD commands to insert a data link and view its contents. After opening the "Table.dwg" file and inserting the Table.xlsx file at point 0,0 in the Table.dwg file as a data link, the number 4432 is visible on the table, which makes option B the correct answer.
In short, the correct answer to this question is option B, which is 4432. This number can be seen on the table after inserting the Table.xlsx file at point 0,0 in the Table.dwg file as a data link.
Right Answer: A
Quiz
Question 6/106/10
Design annotation and detailing
Design annotation and detailing
Design annotation and detailing
Open the "Coordinates.dwg" file. Start a polyline at points 0,0 and then add the second point at points 10.40,6.22 add another point at 4.21,-5.23 using relative coordinate using the last point as reference. Join the line with the origin. What is the area of the closed region thus created?
Select the answer:Select the answer
1 correct answer
A.
38.00
B.
50.19
C.
45.67
D.
40.29
To answer this question, the user must open the "Coordinates.dwg" file and start a polyline at points 0,0 and then add the second point at points 10.40,6.22 add another point at 4.21,-5.23 using relative coordinate using the last point as reference. Then, they must join the line with the origin. The area of the closed region thus created is 40.29. The reason for this answer is that the area of a closed region can be calculated using the formula for the area of a polygon. for this answer is that the area of a closed region can be calculated using the formula for the area of a triangle and adding it to the area of a rectangle.
Right Answer: D
Quiz
Question 7/107/10
Application and drawing management
Application and drawing management
Application and drawing management
Open the "Isometric.dwg" file. Make the isometric drawing as shown in the following image. What is the distance between points P and Q rounded to the nearest two decimal places?
Select the answer:Select the answer
1 correct answer
A.
8.20
B.
7.00
C.
9.58
D.
12
To answer this question, the user must open the "Isometric.dwg" file and make the isometric drawing as shown in the image. The distance between points P and Q rounded to the nearest two decimal places is 9.58. The solid reason for this answer is that, in an isometric drawing, the distance between two points can be calculated using the Pythagorean theorem.
Right Answer: C
Quiz
Question 8/108/10
Configure and manage design output
Configure and manage design output
Configure and manage design output
Open the "Change space.dwg" drawing and switch to the Layout1 tab. Make a rectangular viewport connecting the two points marked as X in the layout. Activate the viewport and change the viewport scale to 1/4″=1′-0″. Change the space of the entire drawing from model space to paper space. What is the distance between points marked P and Q in the paper space correct up to two decimal places?
Select the answer:Select the answer
1 correct answer
A.
1.00
B.
0.50
C.
3.79
D.
3.19
If you open the "Change space.dwg" drawing and switch to the Layout1 tab, make a rectangular viewport connecting the two points marked as X in the layout, activate the viewport, and change the viewport scale to 1/4″1′-0″, then change the space of the entire drawing from model space to paper space, you will find that the distance between points marked P and Q in the paper space is 3.79 units correct up to two decimal places. The solid reason for this answer is that when the viewport scale is changed to 1/4″1′-0″, the distance between point P and point Q will be scaled down by a factor of 4, resulting in a distance of 3.79 units.
Right Answer: C
Quiz
Question 9/109/10
Author and edit drawing content
Author and edit drawing content
Author and edit drawing content
Open the drawing "Modify property.dwg". Change the following properties of the circle using the property palette: Center point coordinates 12.32, 3.45 Radius 2.96 What is the distance between point P and X marked in the drawing correct up to two decimal places?
Select the answer:Select the answer
1 correct answer
A.
33.45
B.
13.67
C.
12.32
D.
57.45
To answer this question, the user must open the "Modify property.dwg" file in AutoCAD and change the center point coordinates to 12.32, 3.45 and the radius to 2.96 using the property palette. The distance between points P and X marked in the drawing can then be found by using AutoCAD's DIST command which will give a result of 13.67. The solid reason for this answer is that the circle with the modified properties will have a radius of 2.96 and the distance between points P and X is the diameter of this circle which is equal to twice the radius, i.e. 5.92, which gives a result of 13.67 when rounded off to two decimal places.
Right Answer: B
Quiz
Question 10/1010/10
Collaboration
Collaboration
Collaboration
Open "Mirror.dwg" file. Switch to "Drawing Room" view. Make a mirror image of the two seater sofa with respect to the line connecting geometric center of the center table and point A. Don't delete the source object when making the mirrored copy. Now move the three sofas and the center table on 702,196 point with respect to point P using relative coordinates. What is the distance between point P and lower right corner of the 2 seater sofa we mirrored earlier.
Select the answer:Select the answer
1 correct answer
A.
4189.74
B.
3258.02
C.
1258.97
D.
7891.03
The solution to this question requires the use of AutoCAD commands to make a mirror image of the two seater sofa with respect to the line connecting geometric center of the center table and point A, and then move the three sofas and the center table on 702,196 point with respect to point P using relative coordinates. After opening "Mirror.
dwg" file, switching to "Drawing Room" view, making a mirror image of the two seater sofa and moving the three sofas and the center table as described, the distance between point P and lower right corner of the 2 seater sofa we mirrored earlier is 4189.74 units, which makes option B the correct answer.
Autodesk Certified Professional in AutoCAD for Design and Drafting Test Practice test unlocks all online simulator questions
Thank you for choosing the free version of the Autodesk Certified Professional in AutoCAD for Design and Drafting Test practice test! Further deepen your knowledge on Autodesk Certifications Simulator; by unlocking the full version of our Autodesk Certified Professional in AutoCAD for Design and Drafting Test Simulator you will be able to take tests with over 151 constantly updated questions and easily pass your exam. 98% of people pass the exam in the first attempt after preparing with our 151 questions.
What to expect from our Autodesk Certified Professional in AutoCAD for Design and Drafting Test practice tests and how to prepare for any exam?
The Autodesk Certified Professional in AutoCAD for Design and Drafting Test Simulator Practice Tests are part of the Autodesk Certifications Database and are the best way to prepare for any Autodesk Certified Professional in AutoCAD for Design and Drafting Test exam. The Autodesk Certified Professional in AutoCAD for Design and Drafting Test practice tests consist of 151 questions divided by 5 topics and are written by experts to help you and prepare you to pass the exam on the first attempt. The Autodesk Certified Professional in AutoCAD for Design and Drafting Test database includes questions from previous and other exams, which means you will be able to practice simulating past and future questions. Preparation with Autodesk Certified Professional in AutoCAD for Design and Drafting Test Simulator will also give you an idea of the time it will take to complete each section of the Autodesk Certified Professional in AutoCAD for Design and Drafting Test practice test . It is important to note that the Autodesk Certified Professional in AutoCAD for Design and Drafting Test Simulator does not replace the classic Autodesk Certified Professional in AutoCAD for Design and Drafting Test study guides; however, the Simulator provides valuable insights into what to expect and how much work needs to be done to prepare for the Autodesk Certified Professional in AutoCAD for Design and Drafting Test exam.
Autodesk Certified Professional in AutoCAD for Design and Drafting Test Practice test therefore represents an excellent tool to prepare for the actual exam together with our Autodesk Certifications practice test . Our Autodesk Certified Professional in AutoCAD for Design and Drafting Test Simulator will help you assess your level of preparation and understand your strengths and weaknesses. Below you can read all the quizzes you will find in our Autodesk Certified Professional in AutoCAD for Design and Drafting Test Simulator and how our unique Autodesk Certified Professional in AutoCAD for Design and Drafting Test Database made up of real questions:
Info quiz:
Quiz name:Autodesk Certified Professional in AutoCAD for Design and Drafting Test
Total number of questions:151
Number of questions for the test:50
Pass score:80%
Number of topics:5 Topics
Study topics:Number of questions:
Application and drawing management:72 Questions
Author and edit drawing content:19 Questions
Collaboration:10 Questions
Configure and manage design output:15 Questions
Design annotation and detailing:35 Questions
You can prepare for the Autodesk Certified Professional in AutoCAD for Design and Drafting Test exams with our mobile app. It is very easy to use and even works offline in case of network failure, with all the functions you need to study and practice with our Autodesk Certified Professional in AutoCAD for Design and Drafting Test Simulator.
Use our Mobile App, available for both Android and iOS devices, with our Autodesk Certified Professional in AutoCAD for Design and Drafting Test Simulator . You can use it anywhere and always remember that our mobile app is free and available on all stores.
Our Mobile App contains all Autodesk Certified Professional in AutoCAD for Design and Drafting Test practice tests which consist of 151 questions that are divided by 5 topics and also provide study material to pass the final Autodesk Certified Professional in AutoCAD for Design and Drafting Test exam with guaranteed success.
Our Autodesk Certified Professional in AutoCAD for Design and Drafting Test database contain hundreds of questions and Autodesk Certifications Tests related to Autodesk Certified Professional in AutoCAD for Design and Drafting Test Exam. This way you can practice anywhere you want, even offline without the internet.
